Restart, else replace inverterlockout
- Turn OFF the main breaker, wait 5 seconds, turn it ON
- If the same error occurs, replace the inverter
Parts: inverter
Fuji Machinery FW3200 fault INVERT ERROR: VFD / inverter: Infeed conveyor inverter or motor error — meaning and fix
Independent resource, not affiliated with Fuji Machinery. Source: manufacturer documentation, p. 90.
What INVERT ERROR means
Infeed conveyor inverter or motor error.
Shown as
- Emergency stop/power supply off message
- INVERTER ERROR
Likely causes, ranked
- Error in the inverter or motor driving the infeed conveyormost likely
Quick checks
Check the inverter error display in the control box
Expected: Error code read; see Inverter Instruction Manual Troubleshooting
Fix
Lock out and tag out first
Isolate the machine and confirm zero energy before touching drives, heaters or the electrical cabinet. Steps marked below need it.
Safety
Follow your site's lockout procedures before working on the machine. This page does not replace the manufacturer's service.
Related codes
- *******BRUSH ERROR · Unstable sealer thermocouple signal
- REGI-MARK/SENS. ERROR · Regi-marks not detected in set operation
- A.02 · Parameter failure
- A.03 · Main circuit detection failure
- A.04 · Parameter out of range
- A.05 · Motor and servopack mismatch
Help the next technician
Questions
- What does INVERT ERROR mean on a Fuji Machinery FW3200?
- Infeed conveyor inverter or motor error. Shown as: Emergency stop/power supply off message; INVERTER ERROR.
- What causes INVERT ERROR on the Fuji Machinery FW3200?
- Error in the inverter or motor driving the infeed conveyor (most likely).
- How do I fix INVERT ERROR on the Fuji Machinery FW3200?
- First check: Check the inverter error display in the control box (expected: Error code read; see Inverter Instruction Manual Troubleshooting). Restart, else replace inverter: 1) Turn OFF the main breaker, wait 5 seconds, turn it ON 2) If the same error occurs, replace the inverter Lock out the machine first.
- Is it safe to fix INVERT ERROR myself?
- Follow your site's lockout procedures before working on the machine. This page does not replace the manufacturer's service. At least one fix here needs the machine locked out and isolated first.
Independent resource, not affiliated with Fuji Machinery. Source: manufacturer documentation, p. 90. Structured paraphrase; no manual text is reproduced.