What does *******BRUSH ERROR mean on a Fuji Machinery FW3200?

Unstable sealer thermocouple signal. Shown as: Alarm shown on touch panel.

What causes *******BRUSH ERROR on the Fuji Machinery FW3200?

The thermocouple signal that reports sealer temperature is unstable (most likely).

How do I fix *******BRUSH ERROR on the Fuji Machinery FW3200?

Clean slip rings: 1) Clean the slip rings Lock out the machine first.

Fuji Machinery FW3200 fault *******BRUSH ERROR: Touch panel: Unstable sealer thermocouple signal — meaning and fix

Independent resource, not affiliated with Fuji Machinery. Source: manufacturer documentation, p. 86.

What *******BRUSH ERROR means

Unstable sealer thermocouple signal.

Shown as

Alarm shown on touch panel

Likely causes, ranked

The thermocouple signal that reports sealer temperature is unstablemost likely

Fix

Lock out and tag out first

Isolate the machine and confirm zero energy before touching drives, heaters or the electrical cabinet. Steps marked below need it.

Clean slip ringslockout

Clean the slip rings

Safety

Follow your site's lockout procedures before working on the machine. This page does not replace the manufacturer's service.

Related codes

INVERT ERROR · Infeed conveyor inverter or motor error
REGI-MARK/SENS. ERROR · Regi-marks not detected in set operation
A.02 · Parameter failure
A.03 · Main circuit detection failure
A.04 · Parameter out of range
A.05 · Motor and servopack mismatch

Every Fuji Machinery FW3200 fault code

Help the next technician

Questions

What does *******BRUSH ERROR mean on a Fuji Machinery FW3200?: Unstable sealer thermocouple signal. Shown as: Alarm shown on touch panel.
What causes *******BRUSH ERROR on the Fuji Machinery FW3200?: The thermocouple signal that reports sealer temperature is unstable (most likely).
How do I fix *******BRUSH ERROR on the Fuji Machinery FW3200?: Clean slip rings: 1) Clean the slip rings Lock out the machine first.
Is it safe to fix *******BRUSH ERROR myself?: Follow your site's lockout procedures before working on the machine. This page does not replace the manufacturer's service. At least one fix here needs the machine locked out and isolated first.

Independent resource, not affiliated with Fuji Machinery. Source: manufacturer documentation, p. 86. Structured paraphrase; no manual text is reproduced.